ShorTi
"UltiClip" set for ShorTi MOD-Sheath
NEW: The ShorTi MOD SheathOur new assembly set "UltiClip" for ShorTi MOD sheath will be available to you soon. It is designed so that carrying systems can be attached to the sheath. Using a tool, our 3.6mm slotted nuts are inserted into the sheath and secured with the M3 tool. Then, for example, the UltiClip SLIM can be mounted from the outside using a flat-head screw. This set is for customers who have the ShorTi MOD sheath without this set. The set includes: 2x M3-3.6mm slotted inserts 1x PA11 insertion tool 1x M3 mounting aid 1x UltiClip SLIM 2.2 1x rubber washer 2x M3 stainless steel flat-head screws (black) The knife nor sheath is NOT included in the set.
NEW: ShorTi "Floe" with Droppoint blade in MagnaCut and PA11 SLIM-sheath
The idea behind the knifeOur ShorTi series in Floe design was developed with the aim of offering our uncompromising 3DTi design in an even more compact and lightweight form. Like the larger MighTi, the new ShorTi is based on the proven titanium handle of the UG-Tool “classic” TiNy. The end of the handle is slightly rounder and there are side recesses to the blade, which allow for a better pinch grip. All other features remain uncompromising and still unmatched: despite its extremely low weight of only 55 grams, the ShorTi with a drop point blade in MagnaCut is as stable as a full tang of the same length. This makes the ShorTi the perfect unobtrusive companion for everyday use (EDC) or an uncompromising backup knife with impressive stability. Features & SpecificationsFeaturesStable as a full-tang at only 55 grams weight.
Specifically designed for inconspicuous everyday use.
3D-printed, internally hollow titanium handle in non-slip "Floe pattern" for S-XL hands.
9 cm drop point blade in MagnaCut with stonewashed surfaceA modular ShorTi sheath is available as an accessory, to which carrying systems such as UltiClip, etc., can be attached. Additional accessories will become available over time. We always ship with the SLIM sheath; the other sheath must be ordered separately.Printed finger guard for maximum safety.Very compact Kydex sheath for your pocket or as a neck Recessed lanyard holes100% designed & made in Germany
SpecificationsTotal weight: 55 gTotal length: 190 mmBlade length: 90 mm
Blade thickness: 2.5 mmBlade steel: MagnaCut @ 63 HRC Handle material: titaniumHandle weight: 30 g
The knife in detail
The handleThe ultralight and stable 3DTi handle made of titanium with the texturing in Floe pattern enables a safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 30 grams, the handle allows long work without fatigue. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all climates. We recommend this grip for glove sizes S-XL.The bladeThe ShorTi with 90 mm droppoint blade made of MagnaCut was designed by us as a universal work knife with 2.5 mm blade thickness . The droppoint shape, with its balanced geometry, enables excellent cutting performance with the highest load capacity of the cutting bevel. The blade is ground even thinner than the TiNy blades and the flat grind extends to the spine, which further increases cutting performance. The stonewashed surface makes the blade insensitive to scratches and lowly reflective. The Ricasso provides long-term resharpenability.
ShorTi MOD-Sheath
NEW: The ShorTi MOD-SheathOur new ShorTi MOD-sheath is now available. It is slightly thicker than the SLIM sheath and can also be worn as a neck knife. The sheath is designed for carrying systems, which we will be expanding gradually. The UltiCip kit is currently available as an accessory. The UlriClip is NOT included in the set.
ShorTi MOD-Sheath with "UltiClip" set
NEW: The ShorTi MOD SheathOur new ShorTi MOD sheath will be available to you soon. It is designed so that carrying systems can be attached to the sheath. Using a tool, our 3.6mm slotted nuts are inserted into the sheath and secured with the M3 tool. Then, for example, the UltiClip SLIM can be mounted from the outside using a flat-head screw. The sheath is suitable for both left- and right-handed users. The set includes: 1x MOD ShorTi sheath 2x M3-3.6mm slotted inserts 1x PA11 insertion tool 1x M3 mounting aid 1x UltiClip SLIM 2.2 1x rubber washer 2x M3 stainless steel flat-head screws (black) We will soon be offering danglers and other accessories for the sheath so you can carry the knife classically on your belt. The knife is NOT included in the set.
ShorTi SLIM-Sheath
NEW: The ShorTi SLIM-SheathOur new ShorTi SLIM-sheath is now available. It’s even slimmer than the MOD sheath and can also be worn as a neck knife. The sheath is not designed for use with carrying systems. The knife is NOT included in the set.
Our 3DTi Handles
Our 3D-printed titanium handles were developed by us with clear goals: To achieve the best balance of weight and stability with the highest functionality and perfect ergonomics. In many iterations, the moulds were repeatedly adjusted over a year and subjected to strict stress tests of the knives (and our nerves) until we were satisfied with the result. With a average wall thickness of 1 mm, the high-strength titanium of the handle is still incredibly stable and allows for a blade with an unusually short tang that has no disadvantages: the titanium supports the tang and force is dissipated into the handle evenly. In addition to the extreme weight saving, another advantage is a large hollow space inside (expect with TiNy-models) which, in combination with our titanium screw cap, provides a storage space for various applications. In addition to our ruby sharpening rod, each individually important item can be stored absolutely dry in the handle.
Our Blades
We source our blades from a renowned Solingen contract grinder, with whom we also work together on the optimal ergonomics of our blades and select suitable steels. We have our blades hardened at the special German hardening shop Werz. Here we have full control over the final result. We fit the blades into the handle without play and glue them into the titanium handle over the entire surface with high-strength adhesive. For even more safety, with most models the blade is additionally screwed from the inside. So it remains fully functional in the unlikely event of the adhesive coming off. The adhesive reliably seals the gap to the handle and prevents dirt and moisture from penetrating. It is possible to have worn or damaged blades replaced by us at a reasonable price.
Our Sheaths
Knife sheaths have always been one of our biggest bottlenecks. Knife sheaths typically are made of leather or Kydex and are produced by hand. Due to our large number of blade-handle combinations, we were unable to have sufficient quantities produced economically. The problem: injection moulded sheaths were far from meeting our requirements. That's why we developed 3D printable sheaths especially for our knives. They are made of PA11 (polyamide) and have, varying by model, for example a removable belt loop, drain holes, an adjusting screw for the perfect fit of the knife and other features. They are available for right- & left-handers. In the future we will offer 3D-printed sheaths and leather sheaths.
Skip product gallery
Regular price:
€199.00
Unsere 3DTi-Messer
TiNy "Floe" with Droppoint blade in 14C28N steel (without sheath)
The idea behind the knifeOur TiNy series in Floe design was developed with the goal of offering our no-compromise 3DTi design in even more compact and lightweight form. The TiNy with droppoint blade is, despite the extremely low weight of only 80 grams, as stable as a full-tang of the same length. This makes the TiNy theperfect unobtrusive companion for everyday use(EDC) or a no-compromise backup knife with impressive stability.CAUTION: This knife is offered here without a sheath.Features & SpecificationsFeaturesStable as a full-tang at only 80 grams weight.
Specifically designed for inconspicuous everyday use.
3D-printed, internally hollow titanium handle in non-slip "Floe pattern" for S-XL hands.
10 cm drop point bladePrinted finger guard for maximum safety.Recessed lanyard holes100% designed & made in Germany
SpecificationsTotal weight: 80 gTotal length: 210 mmBlade length: 100 mm
Blade thickness: 2.8 mmBlade steel: 14C28NHandle material: titaniumHandle weight: 38 g
The knife in detail
The handleThe ultralight and stable 3DTi handle made of titanium with the texturing in Floe pattern enables a safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 38 grams, the handle allows long work without fatigue. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all climates. We recommend this grip for glove sizes S-XL.The bladeThe Tiny with 100 mm droppoint blade made of 14C28Nsteel was designed by us as a universal work knife with 2.8 mm blade thickness . The droppoint shape, with its balanced geometry, enables excellent cutting performance with the highest load capacity of the cutting bevel. The stonewashed surface makes the blade insensitive to scratches and is lowly reflective. The Ricasso provides long-term resharpenability.