Product number:
SW10184
The Idea Behind the Knife
Our friend Roman had been experimenting with the design of our 3DTi TiRex—and from that, the idea for this tool was born. Together, we refined the concept and developed two initial variants: ultra-light EDC tools designed for standard 19 mm utility blades with a maximum length of 61 mm.
Thanks to the interchangeable blade system, you always have access to a sharp and affordable cutting edge—and if needed, the blades can of course be resharpened. The 3D-printed PA11 sheath ensures a secure fit and also allows the tool to be carried as a neck knife.
This model comes with the practical 3DTi titanium clip, allowing for true deep-carry in the pocket and making it perfectly suited for everyday use. A concealed lanyard hole is integrated at the end of the handle.
Please include the following information in your order comments:
Should the clip be mounted for left or right carry (viewed from the spine)?
Features & Specifications
Features
- Ultra-light EDC tool for interchangeable blades
- Designed for discreet everyday carry
- 3D-printed hollow titanium handle made from Ti6Al4V
- Compatible with 19 mm utility blades up to 61 mm length
- Concealed lanyard hole
- Equipped with 3DTi clip for deep-carry pocket carry
- 100% designed & made in Germany
Specifications
- Total weight: 22 g (without sheath), 30 g (with sheath)
- Overall length: 161 mm with blade
- Blade length: max. 60 mm
- Blade thickness: approx. 0.6 mm
- Handle material: titanium
- Sheath material: PA11
Accessories
Knife Sharpener "Metamorph"
This knife sharpener is our own development and a very practical accessory for all knife fans. The special feature is its flexibility: the sharpener can be carried safely on a key ring but also fits into the handles of our two models UniTi and TiBa. The rod is screwed into the M4 thread in our caps and is thus secure against shattering. In a few easy steps, the grip cover can be unscrewed and screwed back on upside down. This creates a very comfortable grip and the blade can be pulled off in a controlled manner. The ruby has an unlimited service life and keeps even our wear-resistant blades very sharp for a long time.All individual parts are printed and finished in titanium. The high-quality ruby rod with 70mm usable length is cut to size ourselves. We also offer a simplified model which is screwed directly to the cap - maybe this option is enough for you?All individual parts are printed and reworked from titanium. The high-quality ruby rod with 70mm useful length is cut to size ourselves. We also offer a simplified model, which is screwed directly to the cap - maybe this option is enough for you? If the ruby turns gray due to metal dust from sharpening, it can be easily cleaned with alcohol or e.g. brake cleaner and a cloth. Fits ONLY in UniTi & Stealth grips, NOT in the TiNy.Developed and manufactured by UG Tools in Sauerland!
Titan Bead "GRAVEL"
This titanium bead in a GRAVEL design goes well with our TiRex in the same design. The surface has a very fine structure and can only be produced using 3D printing. A special piece of jewelry for eternity, made in Sauerland.When you order this bead, it will be knotted to the TiRex with the lanyard of your choice. Please specify the number of the lanyard in the comment field. The lanyard options can be seen in the product photos. Note: in the product photo, the pattern does not yet fit perfectly with the knife handle. However, we have changed that and now both harmonize perfectly, as can be seen in the photo from the 3D design.
Titanium Bead "RING"
This Titanium, ring shaped bead fits perfectly to our TiRex. This combination allows you to hold the knife securely but with great mobility thanks to the flexible lanyard. You can drop it and swing it back into your hand with a small movement, opening up a whole new range of possibilities for your work. With an inner diameter of 23 mm, the ring fits over almost every little finger. A special piece of jewelry for eternity, made in Sauerland.When you order this bead, it will be knotted to the TiRex with the lanyard of your choice. Please state the number of the lanyard in the comment field. The options for lanyards can be seen in the product photos.
Titanium Bead "SPIKE"
This titanium bead in a SPIKE design goes well with our TiRex in the same design. The surface has a very fine structure and can only be produced using 3D printing. A special piece of jewelry for eternity, made in Sauerland.When you order this bead, it will be knotted to the TiRex with the lanyard of your choice. Please specify the number of the lanyard in the comment field. The lanyard options can be seen in the product photos. Note: in the product photo, the pattern does not yet fit perfectly with the knife handle. However, we have changed that and now both harmonize perfectly, as can be seen in the photo from the 3D design.
Our 3DTi-Knives
TiNy "Floe" with Droppoint blade in 14C28N steel (without sheath)
The idea behind the knifeOur TiNy series in Floe design was developed with the goal of offering our no-compromise 3DTi design in even more compact and lightweight form. The TiNy with droppoint blade is, despite the extremely low weight of only 80 grams, as stable as a full-tang of the same length. This makes the TiNy theperfect unobtrusive companion for everyday use(EDC) or a no-compromise backup knife with impressive stability.CAUTION: This knife is offered here without a sheath.Features & SpecificationsFeaturesStable as a full-tang at only 80 grams weight.
Specifically designed for inconspicuous everyday use.
3D-printed, internally hollow titanium handle in non-slip "Floe pattern" for S-XL hands.
10 cm drop point bladePrinted finger guard for maximum safety.Recessed lanyard holes100% designed & made in Germany
SpecificationsTotal weight: 80 gTotal length: 210 mmBlade length: 100 mm
Blade thickness: 2.8 mmBlade steel: 14C28NHandle material: titaniumHandle weight: 38 g
The knife in detail
The handleThe ultralight and stable 3DTi handle made of titanium with the texturing in Floe pattern enables a safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 38 grams, the handle allows long work without fatigue. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all climates. We recommend this grip for glove sizes S-XL.The bladeThe Tiny with 100 mm droppoint blade made of 14C28Nsteel was designed by us as a universal work knife with 2.8 mm blade thickness . The droppoint shape, with its balanced geometry, enables excellent cutting performance with the highest load capacity of the cutting bevel. The stonewashed surface makes the blade insensitive to scratches and is lowly reflective. The Ricasso provides long-term resharpenability.
UniTi "Floe" with Bushcraft Blade in Niolox
The idea behind the knifeThe 3DTi knife UniTi with Floe handle is with the 12 cm Bushcraft blade the no-compromise Outdoor-knife in our repertoire. Like all of our knives, this model offers extremely light weight at 153 g with the stability of a full-tang.
Features & SpecificationsFeaturesStable as a full-tang at only 153 g weightSpecially designed for Bushcraft
3D-printed titanium handle in non-slip "Floe pattern" for S-XL hands12 cm Niolox blade with stonewashed finish
Storage space in the handle
Precise finger protection for maximum safety
3D-printed sheath made of PA11 (polyamide)Recessed lanyard holes with100% designed & made in Germany
SpecificationsTotal weight: 153 g
Total length: 240 mm
Blade length: 120 mm
Blade thickness: 4 mmBlade steel: Niolox (1.4197)
Handle material: titanium
Handle weight: 72 g
End cap material: titaniumThe knife in detailThe handleThe ultralight and stable 3DTi handlemade of titanium with the texturing in the Floe pattern enables safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 72 grams, the handle allows for long work without fatigue. The hollow handle also provides waterproof storage for our separately sold sharpening rod or other items and has recessed lanyard holes. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it usable in all climates. We recommend this grip for glove sizes S-XL.The BladeOur Bushcraft Bladewith 120 mm length is designed for the widest possible range of uses has been developed and offers in the outdoor area as good performance as on the hunt or as a companion in the everyday life. The 42a-compliant, 4 mm thick Bushcraft blade is made of the proven niobium knife steel Niolox (1.4197) ground thin and due to the high grinding very friendly to cut. The tough steel has enough back for considered batoningand the droppoint blade with pronounced belly is good to control. The stonewashed surface makes the blade insensitiveagainst scratchesand is lowly reflective. The Ricasso provides long-term resharpenability.